The Picard ManeuverM to Lemmy Shitpost@lemmy.world • 1 year agoWhoopslemmy.worldimagemessage-square98fedilinkarrow-up11.22Kcross-posted to: the_pack@lemmy.world
arrow-up11.22KimageWhoopslemmy.worldThe Picard ManeuverM to Lemmy Shitpost@lemmy.world • 1 year agomessage-square98fedilinkcross-posted to: the_pack@lemmy.world
minus-square@Sam_Bass@lemmy.worldlinkfedilink53•edit-21 year ago+1 for torx. Have actually snapped screw shafts with those
minus-square@LeroyJenkins@lemmy.worldlinkfedilink10•1 year agohonestly torx is still garbage. the tiny ones on the bottom of tech products that get cemented in still strip like nobody’s business.
minus-squareBoomer Humor DoomergodlinkfedilinkEnglish11•1 year agoTech products often use stainless steel bolts, which are a lot softer than a normal steel
minus-square@LeroyJenkins@lemmy.worldlinkfedilink1•1 year agoalrighty so torx screws are just shit in most cases you encounter them
minus-squareTheRealKunilinkfedilinkEnglish3•1 year agoI’d say by sheer count the majority of Torx screws I’ve encountered have been for deck boards, not tiny tech screws. And they were excellent.
minus-squareKptnAutismuslinkfedilink7•1 year agophillips doesn’t scale any better. i’m actually glad whenever i see torx on small devices instead.
minus-square@Sam_Bass@lemmy.worldlinkfedilink5•1 year agoNever have for me. I dont turn til fully seated
minus-square@LeroyJenkins@lemmy.worldlinkfedilink3•1 year agoI ain’t screwing with half my ass off my seat
minus-squareTacolinkfedilinkEnglish1•1 year agoIdk man, I’ve been working IT for 10 years and have never stripped a torx. Didn’t know it was possible
minus-square@Sludgeyy@lemmy.worldlinkfedilink5•1 year agoThat’s the whole difference between torx vs Phillips. Theoretically, you should never break a screw shaft with Phillips because they are designed to cam out before enough torque is applied to break the shaft of the screw. It’s supposed to be a feature
minus-square@Sam_Bass@lemmy.worldlinkfedilink2•1 year agoStill gonna use torx because once a philips cams out the screw as well ss the tool tip is useless
minus-square@PastyWaterSnake@lemmy.worldlinkfedilink1•1 year agoI believe this is actually a myth, post-hoc reasoning to explain away a shitty design
+1 for torx. Have actually snapped screw shafts with those
The poor man’s Robertson
Go back to Canada!
Who needs more than 4 sides anyway?
honestly torx is still garbage. the tiny ones on the bottom of tech products that get cemented in still strip like nobody’s business.
Tech products often use stainless steel bolts, which are a lot softer than a normal steel
alrighty so torx screws are just shit in most cases you encounter them
I’d say by sheer count the majority of Torx screws I’ve encountered have been for deck boards, not tiny tech screws. And they were excellent.
phillips doesn’t scale any better. i’m actually glad whenever i see torx on small devices instead.
Never have for me. I dont turn til fully seated
I ain’t screwing with half my ass off my seat
Your choice, kudasai ;)
Idk man, I’ve been working IT for 10 years and have never stripped a torx. Didn’t know it was possible
That’s the whole difference between torx vs Phillips.
Theoretically, you should never break a screw shaft with Phillips because they are designed to cam out before enough torque is applied to break the shaft of the screw.
It’s supposed to be a feature
Still gonna use torx because once a philips cams out the screw as well ss the tool tip is useless
I believe this is actually a myth, post-hoc reasoning to explain away a shitty design